Heat seal Cover tape / ヒートシール型カバーテープST-Poly Conductive layer PET sideSealant sideST-Cover Tape (Conductive) / AS-Cover Tape (Antistatic) ST-Cover Tape (Conductive) / AS-Cover Tape (Antistatic) ST-931/ AS-932Semiconductor、MLCC、ディスクリート部品出荷用 / 機構部品出荷用●Stable peeling property can keep small chips components secure and avoid jumping problems.●High transparency with little haze enables recognition of IC chips even after they are taped to embossed carrier tape, facilitating efficiency for quality control purposes.●Good ESD protection prevents electrification caused by peeling and friction which may lead to electrostatic damage or jumping to semiconductor parts. Conductive layer “ST-Poly” for ST-cover Tape; antistatic layer for AS cover tape makes this possible.●安定したピール特性で、小型チップ部品のジャンピングを抑制します。●ヘイズが少なく透明性に優れ、テーピング後の部品を容易に確認できます。●優れた帯電防止性能で剥離や摩擦による帯電を防ぎ、部品のジャンピングや静電破壊を抑制します。AS-9325.5,9.5,13.5,21.5300,6003ST-931(Conductive)PET side:2.1×105 Sealant side:1.0×1014PET side:1.0×1014Sealant side:1.0×10141080UnitμmMPa%%%+-ItemOverall ThicknessTensile StrengthElonationTransparencyHazeAS-932(Antistatic)4678.419679.89.90.010.014677.814387.19.20.100.10Test proceduremicrometerJIS K 6734JIS K 6734JIS K 7105JIS K 7105Sealant sideAchilles MethodJIS K 6911(23℃×60%RH)Ω VsecUnitItemmmmInchWidthLengthCore DiameterPET sideAntistatic sideSealant sideProduct No.PSPCAS-932○○ST-931○○■Materials of an adaptive emboss carrierAchilles Method:I measure the electrostatic charge voltage between the cover tapes detachment side with the conductive emboss carrier tapes which a part is not in.※This is actual measured value not guaranteed value. ※本データは実測値であり保証値ではありません。※Other size is available.「ST-931」「AS-932」Product nameProduct No.Features特 長USEDimensionsCondensedST-9315.5,9.5,13.5,21.5300,6003Decay TimeSurface ResistivityPeel Electriccation Voltage※本デー※本デ※本デ本タは実測タは実測タは実測タ実測値であり値であり値であり値保証値で保証値で保証値で保証値はありまはありまはありません。せん。せん。Pressure Sensitive Adhesive Cover Tape / 粘着型カバーテープST-Cover Tape (Conductive) / AS-Cover Tape (Antistatic) ST-Cover Tape (Conductive) / AS-Cover Tape (Antistatic) ST-PSA/ AS-PSASemiconductor、Connector、LED部品出荷用●High ESD protection performance prevents electrostatic damage or jumping problems to semiconductors from occuring.●Adhesive provides stable sealing properties for a wide variety of embossed carrier tape base materials. No need for thermo-compressing (possibly cut energy costs). Easy to peel & re-tape.●Good transparency enables easy inspection after taping, facilitating efficiency for quality control purposes. ●粘着剤がテープ端面より内側にある事でリワーク性に優れ、マウント時のトラブルを低減します。●粘着剤による安定したシール性能を持ち、再剥離・再粘着も容易です。●ヘイズが少なく透明性に優れ、テーピング後の部品を容易に確認できます。●優れた帯電防止性能で剥離や摩擦による帯電を防ぎ、部品のジャンピングや静電破壊を抑制します。Product nameProduct No.Features特 長USECondensed[ Conguration 構成 ]「ST-PSA」「AS-PSA」[ Conguration 構成 ]【Peel properties of ST-PSA-110/ST-PSA-220】SampleCover tape :ST-PSA-220 5.4mm widthEmboss carrier tape :C.B.PS 8mm width ( for ST-PSA-220 )Seal condition Peel conditionSeal machine :PTS-180 made by PALMEC Peel machine:PFT-50s made by PALMECSeal shoe :12mm length×1.1mm width(for ST-PSA-110/220) Peel angle:170°Feed pitch :4mm ( for ST-PSA-110/220 ) Peel speed:300mm/minSeal time :0.3secSeal pressure :0.4MPa Safekeeping conditionSeal temperature :40℃ R.T./40℃×95%RH /60℃【Peel properties of AS-932/ST-931】SampleCover tape :AS-932 5.5mm width :ST-931 5.5mm widthEmboss carrier tape :Carbon-mixed PS 8mm widthSeal condition Peel conditionSeal machine :PTS-180 made by PALMEC Peel machine:PFT-50s made by PALMECSeal shoe :8mm length ×0.4mm width Peel angle:170°Feed pitch :4mm Peel speed:300mm/minSeal time :0.1sec ( for C.B.PS )Seal pressure :0.4MPa Safekeeping conditionSeal temperature :100~200℃ Seal temperature vs Peel strength:Room temperature(R.T.) Progress time vs Peel strength:R.T.■Materials of an adaptive emboss carrierST-PSA/AS-PSAUnitItemmmmmmInchWidthWidth of adhesion departmentLengthCore Diameter※Other size is available.Dimensions37.525.521.313.39.35.41.51.20.8300、5003Achilles Method:I measure the electrostatic charge voltage between the cover tapes detachment side with the conductive emboss carrier tapes which a part is not in. ※This is actual measured value not guaranteed value.※本データは実測値であり保証値ではありません。Surface ResistivityPeel Electriccation VoltageOverall ThicknessHazeTransparencyTensile StrengthμmMPa%%PET side:30PET side:1.6×106Seal side:2.6×1064.780.240.3Adhesive layer:20PET side:1.0×1014
元のページ
../index.html#6